Our products

HydraMaxx 1 Litre

$101.20

Hydraulic oils contain specific additive formulas designed to meet the specific needs of hydraulic systems and typically focus on anti-wear (AW), rust and oxidation (RO) or multi-viscosity (MV) formulas. 

HydraMaxx is a balanced formula designed to blend with these oils to complement and enhance the protection of equipment under difficult performance requirements where the oil alone proves inadequate. Power transfer may still occur when using oil which has surpassed useful service life. When this occurs many of the key performance aspects of the oil are no longer functioning. 

HydraMaxx enhances: 

* Cold flow
* Viscosity index
* Water separation and unparalleled anti-wear
* Rust and corrosion protection

HydraMaxx also uses seal conditioning agents, reducing the long-term effects of heat exposure to elastomer seals and hydraulic hoses. HydraMaxx is compatible with mineral based (Group II + III) and synthetic-based polyalphaolefin and diester (Group IV) hydraulic oils. HydraMaxx is not recommended for use with water-based fluids, phosphate esters or polyglycol fluids.

Can be supplied in 4, 10, 20 Litre bottles - Price on application

Safety data sheet

DESIGNED FOR PERFORMANCE


* Extends oil service life.
* Improve energy efficiency.
* Integrates well with synthetic and conventional 
  hydraulic oils.
* Contains no zinc and can be used with hydraulic 
  systems requiring zinc-free oils.
* Separates water from hydraulic oils.
* Enhances cold weather operation.
* Reduces ultrasonic noise caused by component 
  wear.
* Reduces fuel and / or electrical power 
  consumption in many applications.
* Improves filtration efficiency by reducing the 
  generation of large wear particles.
* Increases equipment availability; extends 
  component life.
* Provides long term protection for pumps, valves, 
  motors, cylinders, seals and hoses

Over the life of a fluid the additive package depletes. HydraMaxx can extend fluid life and slow the process of oil degradation. Hydraulic systems rely on high
quality oils performing a dual role: lubricating the system and providing fluid power transfer. Modern high-pressure pump systems require anti-wear protection, coupled with the prevention of rust, corrosion, varnish buildup, foaming and air entrainment. HydraMaxx provides superior performance and protection for demanding hydraulic applications.



This carefully balanced formula is designed to complement and enhance the existing hydraulic oil formulations. HydraMaxx should be mixed with oil prior to adding to hydraulic oil reservoir. May be added to component directly when needed. TREAT RATIO 5% of oil volume. For extreme cold higher concentrations may be used.

HydraMaxx is recommended for all hydraulic circulating systems and is compatible with Nitrile, Neoprene and Fluorocarbon elastomer seals. HydraMaxx may also be used in automatic transmissions at 1% HydraMaxx to oil volume. Oil Sampling is recommended when extending fluid service life. HydraMaxx can be used to enhance existing additive packages or for creating custom blends. Always ensure oil blends meet the minimum requirements as outlined by the OEM.